This is a entertaining and reasonably uncomplicated home furniture repurpose venture. I designed a desk out of aged nightstands. Even if you simply cannot wholly recreate this precise undertaking, I hope this article evokes you to glimpse all-around at what you have and see how you can repurpose it into one thing you will need! Allows get began on this Do it yourself Desk Create.
Contents
- 1 Action 1: Structure and evaluate your Do it yourself Desk
- 2 Related articles
- 3 4th of July Fruit Salad Recipe (Red, White, & Blue!)
- 4 Inside $2.79 million Laird Hamilton House in Hawaii: A 9.99 Acres of land!
- 5 Stage 2: Lower and assemble your prime
- 6 Stage 3: Wood fill, primer and paint the best.
- 7 Stage 4: Drawer Fronts
- 8 Stage 5: Paint every little thing else
- 9 Step 6: Hardware to your Diy Desk
Action 1: Structure and evaluate your Do it yourself Desk
In advance of we can truly get began, we need to decide the measurement and condition you want your desk to be. I was generating my desk a corner, L shaped desk. So I positioned the 2 nightstands where by I would want them and calculated how huge I would have to have the top rated to be.
Stage 2: Lower and assemble your prime
Utilizing the measurements you just came up with, you will require to lower your plywood to the proper dimension. I am earning an L formed desk, and I presently experienced 2 items of wooden that I was heading to use. I had to cut them to be 45 degrees on the finishes, so I could link them into the L shape.
Utilizing my angle finder I found and marked the 45 diploma line on the wooden. I then put some painters tape on the line, so that when I slash it, it did not splinter. The best trick I have found to get a straight line utilizing a round saw, is to clamp a extensive, straight, piece of wood on, and operate the edge of the saw together it as you reduce. I slice equally parts, and linked them utilizing pocket holes on the base.
Stage 3: Wood fill, primer and paint the best.
After the major is assembled you will use wooden filler, to fill all seams. When that is dry, primary the wooden. Just after the primer is dry, you will use 220 grit sandpaper and give it a rapid sanding to clean out the bumps. Paint the top rated with your beloved paint and allow it dry as we transfer onto the drawers.
Stage 4: Drawer Fronts
I needed to make new drawer fronts since I did not like the curved edges on the current drawers. To take out the current drawer fronts, you just unscrew them from the inside. I utilized the first drawer fronts as a template for the proportions on the new types.
I then primed, sanded and painted the drawer fronts right before reattached them.
Stage 5: Paint every little thing else
Now its time to pull the desk together by portray the nightstands the similar color as the drawer fronts.
Step 6: Hardware to your Diy Desk
I think finding the hardware was the hardest section. So, I picked up numerous unique solutions, and decided at the time I got to this level which one particular I desired. I went with THESE pulls. When I made a decision which one particular I required, I utilized THIS manual to drill holes, then set up the pulls.
And that is it! Easy and enjoyment! I adore that I was equipped to repurpose the nightstands that would have otherwise been thrown out or donated. What furnishings do you have that you could repurpose?
Comply with together for a lot more DIY’s and fun at…
The write-up Trash to Treasure: Repurposed Nightstand into Do-it-yourself Desk appeared initially on Spetrich Residence.